Configuration
The configuration is device-dependent and varies according to the products used and the system layout.
General information
- A smartphone is required to change the configuration.
- Configuration changes are only possible while the device is supplied with power.
- The basic functions of the device can also be used without the app.
- After every configuration change, the inputs and outputs must be checked for correct operation.
App and system integration
If the system consists of several connected devices, configuration changes can also be transferred to other devices in the system, or carried out there, via the connected device.
Typical configuration options of the Vanbase 6+
- Removing the numerical assignment of push button and output
- Brightness of the status LED
- Use of push buttons or switches on the inputs
- Maximum and minimum brightness of the outputs
- Outputs dimmable or non-dimmable
- State of the outputs after the voltage returns or after the device is switched on
- Automatic switch-off of the outputs after a defined time
- Assignment of new inputs to the outputs
- Scene management, e.g.
All Offand user-defined scenes